Oldsmobile Cutlass

1970 Oldsmobile 455 Block and Alum heads
Bored 60 over
464 Cu In total
Ross Flat Top Piston 11.1 Compression
Eagle Forged Steel Rods
Forged Nodular Crank - Not stroked at all
Fluidamper Harmonic Balancer
Manley Valves - I think 2.160 and 1.680 if I remember correctly
Cam Shaft, Push Rods, lifters, Valve springs
Milidon Deep Sump 8 quart oil pan

Heads - Edelbrock Performer RPM Aluminum Heads - 60529
Comp Cams Mech Roller Street 13480/13483/108.650
Comp Cams Mech Roller Lifters 849-16
Harland Sharp 5017 Rockers
Cometic MLS Head Gaskets .060
Manton Pushrods 10.100x .140 Wall
Xtra Long ARP Studs 334 7202
2.160 Intake Valves
1.680 Exhaust Valves
PAC R315 LTW Steel Retainers
Viton Valve Seals 343 530
Comp Cams Spring Locators 4778
Comp Cams 10 deg -.050 locks 630-16
PAC 1227 Valve Springs 190lb@1.975/500lb Open
BTR Roller Camshaft Bolt
Ported and Polished
Serdi Valve Job
Machine Spring Pockets 1.575
Machine Pushrod Holes for 1.7 Rockers
Port Bowls
Bronze Thrust Washer
Machine Cam for Thrust
BTR Multi Hole Timing Chain Set
Set Springs, Rockers, Hone Guides
Flatout Intake Gaskets
Flatout Exhaust Gaskets 7186S
Flow 314.6 CFM@650 lift
Picked up over 30CFM from the porting and polishing work

Never ran with this set up but with Cast heads, an 850Carb, smaller Cam and simple pulley system I ran 11.01 at 117MPH in a 3500 LB Car so with all this work, it will run at least 10.50

Motor does not include the following Parts but also FOR SALE is.

Headers from American Racing Headers (Jet Hot Coated) - $1000
http://www.lmperformance.com/736247/obba-64178300hr-american-racing-headers-olds-big-block-a-body-1964-1977-1-7-8in-x-3in-header-pair.html

MONDELLO Valve covers - Retail $499 VC-485 Oldsmobile Aluminum Valve Covers - Ill take $350.00
Cast aluminum extra tall valve covers with 'Oldsmobile' in script lettering, and Olds rocket emblems fore & aft. Will fit all roller rocker arm systems and the JM-1160 rocker stud girdle. Will not fit under OEM A/C, power steering, power brake or accessory brackets.
(No baffles, outer height 4.750", inner height 4.250", 5 bolt holes but can be drilled for 10, can be ordered with breather holes staggered or straight across. When ordering, indicate your preferences in the 'Comments' area of the order form.) Set of 2.

Complete - High Performance Pulley system includes 110 Amp Polished Alternator, Polished Compressor - $1500
- Mondello 2250-5809 Aluminum Pulleys
These new 2 groove pulleys are state of the art and fit all 330 through 455 engines. 22% underdrive, deep 'V' groove design. Includes water pump, crankshaft and alternator pulley (with cover plate for alternator pulley).
- Mondello 2250-5811 Power Steering Pump Pulley
This is a single groove Aluminum Power Steering Pump Pulley for all Oldsmobile's. Keyway design, not press fit.
- Mondello - PSB-490 Power Steering Pump/Bracket/Pulley
Package deal! Billet Aluminum Bracket/Power Steering Pump/Pulley. Fits most Oldsmobile engines.
- Mondello - AB-490 Alternator Bracket Kit
This bracket mounts on the lower passenger side. All aluminum.
For more info please visit
http://www.mondellotwister.com/EngineAcc.htm

Please any questions just ask!
If you need any other parts we have many available!